"breathing life into your environment"

Home

News

New Products

Products

Services

Brochure

O & I Instructions

Helpful Notes

Vacancies

About us

Contact Us

Accreditations

Recycling

Slimline 100 Range: 230v and 12v

Download & print PDF page

The SLIMLINE range of 100mm (4") fans comprises quiet, efficient, axial flow fans for wall or ceiling mounting. Designed for easy installation, attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning and incorporating the latest technology and design. The SLIMLINE 100 series is ideally suited for domestic applications including bathrooms, toilets and shower areas. The range is available in 230v and 12v Low Voltage. The fans are extremely aesthetically pleasing as they have a 12mm profile.

Fans can be wall or ceiling mounted British made Designed to exceed the 2006 Building Regulations on Ventilation (F1) Tested to comply with HD280/BS3456 Part 102:342 1988 Aesthetically pleasing 2 year no quibble guarantee

Technical Data

230v models

Catalogue No.	Type
SL100	Standard model - for remote switching.
SL100S	As above supplied with integral pull switch.
SL100T	Timer model - with integral over-run timer (15 mins).
SL100HTS	Humidity control - The fan will run will run when humidity rises over the pre-set level of 65% RH. Complete with integral timer (15 mins) with manual pull switch.

Low Voltage 12v models

Catalogue No.	Type
SL100LV	Standard model - for remote switching.
SL100LVS	As above supplied with integral pull switch.
SL100VT	Timer model - with integral over-run timer (15 mins).
SL100VHT	Humidity control - The fan will run will run when humidity rises over the pre-set level of 65% RH. Complete with integral timer (15 mins).

Construction	These fans are moulded in impact resistant high gloss ABS thermoplastics for strength, durability and finish.
Electrical	· 220-230v ~ A.C. 50Hz Single phase consuming 14 watts. These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted and mounted a minimum of 1.75 metres from the floor and less than 400mm from the ceiling. Do not install the fan above a heat source. e.g. radiator
Motor	Single phase induction motor with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal fuse.
Guarantee	Two year no quibble guarantee.
Installation	Both 230v and 12v ranges are designed to be wall or ceiling mounted. Kits available on request. Wall kits comprise a wall sleeve (275mm long) and a gravity grille (white, terracotta, stone, grey or brown). Ceiling kits comprise 3m 100/150mm flexible ducting and an external fixed grille (colours to suit). Installation through a wall or ceiling requires a 107mm hole.
Performance	SL100 / SL100LV - extract rate of 90m³/hr, 27 litres per second.
Additional Data	Maximum pressure: 38 p.a. Fan speed: 2400 r.p.m. Sound volume: 40.0 dB(A) Maximum operating temperature 40ºC. Protection Rating – IP34

Unit Dimensions & Cut-outs
A	150 mm
B	150 mm
Ø	100 mm
C	108 mm
D	12 mm
E	12 mm
Wall Hole	107mm
Ceiling Hole	107mm

Back to the top

< < Previous page

Download & print PDF page

print this HTML page

	Ferrob Ltd. Regency House, Kingsclere Park, Kingsclere, Newbury, Berks. RG20 4SW Tel: 01635 299266 Fax: 01635 299277 Email: sales@ferrob.co.uk
Click here to go to our accreditations page, where you can download backup documentation Powered by Multiplex Internet Services Last updated 24 August 2010 S