Sensortronic 1000 (S 1000) : 230v

Download & print PDF page

Sensortronic 1000 (S 1000) : 230v The Sensortronic 1000 150mm (6") kitchen fan comprises a quiet, efficient, axial flow fan for wall, ceiling or window mounting.

Designed for easy installation, attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning and incorporating the latest technology and design.

The Sensortronic 1000 series is ideally suited for domestic kitchen applications. It features an integral pullcord and Ferrob's unique electronic continuouslycalibrated humidity sensor which ensures that the sensor will always give an accurate reading of the surrounding humidity.

A 2-light display is included on the front panel which informs the resident what the fan is doing (yellow and red lights). The yellow light will show when the unit is running due to a high humidity level and the red light when the unit is in manual operation.

	Extract rate 235mł/hr, 64 litres per second
	Fans can be wall, ceiling or window mounted
	Integral speed adjustment
	British made
	Electronic continuously calibrated humidity sensor
	Designed to exceed the 2006 Building Regulations on Ventilation (F1)
	Tested to comply with HD280/BS3456 Part 102:342 1988
	2 year no quibble guarantee

Technical Data

230v models

Catalogue No. Type

S 1000 Humidity control - The fan will run when humidity rises over the pre-set level of 65% RH. Complete with integral pullcord switch and unique self-cleaning humidity sensor.

S 1000 TRS Continuous running with humidity and pull switch boost.

Construction
These fans are moulded in impact resistant high gloss ABS thermoplastics for strength, durability and finish.

Electrical

220-230v ~ A.C. 50Hz Single phase consuming 20 watts. These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted. The fan should be mounted a minimum of 1.75 metres from the floor and less than 400mm from the ceiling.

Do not install the fan above a heat source. e.g. radiator

Motor
Single phase induction motor with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal fuse.

Guarantee
Two year no quibble guarantee.

Installation

The fans are designed to be wall, window or ceiling mounted. Kits available on request.

Wall kits comprise a wall sleeve (275mm long) and a gravity grille (white, terracotta, stone, grey or brown).

Window kits comprise an external white fixed grille and internal fixing plate.

Ceiling kits comprise 3m 150mm flexible ducting and an external fixed grille (colours to suit).

When installing through a wall or ceiling a 162mm hole is required, 175mm through a window.

INSTALLATION NOTE:
For standard installation through a wall, we recommend a 162mm dia hole.
For special installations through a wall using an Internal Cowle system (IC100), we recommend a 162mm dia hole.
For standard installation through a window, we recommend a 182mm dia hole.
Suitable core drills (162mm) are available separately from FERROB LTD

Performance S 1000 - extract rate of 235mł/hr, 64 litres per second.

Additional Data

Maximum pressure: 50 p.a. Fan speed: 2 400 r.p.m.

Sound volume: 40.0 dB(A) Maximum operating temperature 40şC.

Protection Rating – IPx4

Unit Dimensions & Cut-outs

A 206mm

B 206mm

C 150mm

D 42mm

E 54mm

Hole sizes:

wall / ceiling 162mm

window 175mm

SPECIFICATION

Extract rate
at full speed Supply voltage Max wattage Noise level Warranty Fan Speed Colour Self-cleaning sensor Max pressure Digital display Speed options Download facility

235mł/h
64ltrs/sec 220/230 20 40db at full speed 2 year RTB 2 400 at full speed White Yes 50 p.a. No Yes No

NOTES:

* Specification dependent on model

Graph for Sensortronic 1000 Range

Back to the top
< < Previous page Download & print PDF page print this HTML page

Ferrob Ltd.
Regency House, Kingsclere Park, Kingsclere, Newbury, Berks. RG20 4SW
Tel: 01635 299266 Fax: 01635 299277
Email: sales@ferrob.co.uk

Click here to go to our accreditations page, where you can download backup documentation
Click here to go to our accreditations page, where you can download backup documentation
Powered by Multiplex Internet Services Last updated 19 October 2007 S

Catalogue No.	Type
S 1000	Humidity control - The fan will run when humidity rises over the pre-set level of 65% RH. Complete with integral pullcord switch and unique self-cleaning humidity sensor.
S 1000 TRS	Continuous running with humidity and pull switch boost.

Unit Dimensions & Cut-outs
A	206mm
B	206mm
C	150mm
D	42mm
E	54mm
Hole sizes:
wall / ceiling	162mm
window	175mm

Extract rate at full speed	Supply voltage	Max wattage	Noise level	Warranty	Fan Speed	Colour	Self-cleaning sensor	Max pressure	Digital display	Speed options	Download facility
235mł/h 64ltrs/sec	220/230	20	40db at full speed	2 year RTB	2 400 at full speed	White	Yes	50 p.a.	No	Yes	No