Sensortronic Micro 400 Range: 230v and 12v

The Sensortronic Micro 400 range of 100mm (4") bathroom and toilet fans comprises quiet, efficient, axial flow fans for wall, ceiling or window mounting. Designed for easy installation, attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning and incorporating the latest technology and design.

The M 400 series is ideally suited for domestic applications including bathrooms, toilets and shower areas.

The units are controlled using the latest micro-processor technology and has features such as Night-time Set-back to eliminate unnecessary running at night and incorporates Ferrob's unique humidity sensor.

The units are controlled using the latest micro-processor technology and has features such as Night-time Set-back to eliminate unnecessary running at night and incorporates Ferrob's unique humidity sensor. The humidity level can be read using a hand held monitor, part no: 1500 (available separately)

The range also includes 12v Low Voltage models for use when required.

Technical Data

230v models

Catalogue No.	Type
M 400 HT	Humidity control - The fan will run when humidity rises over the pre-set level of 65% RH. Complete with integral timer (15 mins).
M 400 HS	Humidity control - The fan will run when humidity rises over the pre-set level of 65% RH. Complete with integral pull switch.

Low Voltage 12v models

Catalogue No.	Type
M 400 LV HT	Humidity control - The fan will run when humidity rises over the pre-set level of 65% RH. Complete with integral timer (15 mins).
M 400 LV HS	Humidity control - The fan will run when humidity rises over the pre-set level of 65% RH. Complete with integral pull switch.

Construction	These fans are moulded in impact resistant high gloss ABS thermoplastics for strength, durability and finish.
Electrical	220-230V ~ A.C. 50Hz Single phase consuming 20 watts. These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted mounted a minimum of 1.75 meters from the floor and less than 400mm from the ceiling. Do not install above a heat source, e.g. radiator.
Motor	Single phase induction motor with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal fuse.
Guarantee	Two year no quibble guarantee.
Installation	The range is designed to be wall, window or ceiling mounted. Kits available on request. Wall kits comprise a wall sleeve (275mm long) and a gravity grille (white, terracotta, stone, grey or brown). Window kits comprise an external white fixed grille and internal fixing plate. Ceiling kits comprise 3m of 100mm flexible ducting and an external fixed grille (colours to suit). When installing through a wall a 107mm hole is required, 126mm through a window. INSTALLATION NOTE: For standard installation through a wall, we recommend a 107mm dia hole. For special installations through a wall using an Internal Cowle system (IC100), we recommend a 117mm dia hole. For standard installation through a window, we recommend a 125mm dia hole. Suitable core drills (107mm and 117mm) are available separately from FERROB LTD
Performance	M 400 / M400LV - extract rate of 90m³/hr, 27 litres per second.
Additional Data	Maximum pressure: 50 p.a. Fan speed: 2 400 r.p.m. Sound volume: 40.0 dB(A) Maximum operating temperature 40ºC. Protection Rating – IPx4

Unit Dimensions & Cut-outs
F	166
G	166
H	100
J	42
K	42
Wall Hole	107mm
Ceiling Hole	107mm
Window Hole	126mm

SPECIFICATION

Extract rate at full speed

Supply voltage

Max wattage

Low Voltage

Noise level

Warranty

Fan Speed

Colour

Self-cleaning sensor

Max pressure

Digital display

Speed options

Download facility

90m3/h 27ltrs/sec

220/230

20

Yes

40db

2 year RTB

2400

White

No

50 p.a.

No

No

No

Graph for Micro 400 Range

Back to the top

< < Previous page

Download & print PDF page

print this HTML page

	Ferrob Ltd. Regency House, Kingsclere Park, Kingsclere, Newbury, Berks. RG20 4SW Tel: 01635 299266 Fax: 01635 299277 Email: sales@ferrob.co.uk
Click here to go to our accreditations page, where you can download backup documentation Powered by Multiplex Internet Services Last updated 24 August 2010 S