HR 100

Heat recovery units for single rooms

The heat recovery units for single rooms have been specifically designed to eliminate excessive moisture and so helping to prevent condensation with the inherent risks to property and health whilst retaining up to 80% of heat contained within the outgoing air.

The range is available in 230v or 12v models depending upon installation criteria. All models run continuously on trickle speed and have various options to change to fast speed - see model table below. Mounting Kits Available in Brown, White, Terracotta and Stone.

All units are manufactured to have balanced airflow so as not to interfere with conventional gas boilers / heating systems where negative air pressure within a problem may cause a problem.

Suitable for: Single rooms

  • Wall, Window or Ceiling mounted
  • Integral Humidity Sensors
  • Energy saving manual Pullcord override
  • Two year no quibble guarantee
  • Recovers up to 80% of heat that would otherwise be lost
  • Simple Installation
Model Description
HR100 Heat recovery unit | Remote boost
HR100S Heat recovery unit | Continuous trickle | Pull cord boost
HR100HS Heat recovery unit | Continuous trickle | Humidity sensor | Pull cord boost
HR100LVS Heat recovery unit | Continuous trickle | Pull cord boost | Low voltage
HR100LVHTS Heat recovery unit | Continuous trickle | Humidity sensor | Timer | Pull cord boost | Low voltage
Construction

These units are made of strong and durable self-extinguishing plastic for strength, durability and finish.

Electrical

220-230v ~ A.C. 50Hz Single phase consuming 10 watts max. These units do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted.

Installation
  • Both 230v and 12v ranges are designed to be wall, window or ceiling mounted. Kits available on request.
  • Installation through a wall or ceiling requires a 117mm hole, through a window a 126mm hole.
  • Do not install above a heat source e.g. cooker, radiator.
  • It is recommended to change the internal filter and clean the heat exchange matrix on a yearly basis.
Additional Data
  • Maximum Pressure: 84Pa high speed
  • Power Consumption: 11W
  • Sound Volume: 35dBa high speed
  • Maximum Operating Temperature: 40 degrees C
  • Protection rating: IPx4
  • Running Costs: typ less than £1.00 per month (based on slow speed running 24 hours per day)

Technical dataTechnical data