Sensortronic Digital 1000: Low Wattage

Download & print PDF page

Using the latest technology DC motors and consuming only 11watts (max), the Sensortronic Digital 1000 Low Wattage 150mm (6") kitchen fan comprises a quiet, efficient, axial flow fan for wall, ceiling or window mounting.

Designed for easy installation, attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning and incorporating the latest technology and design.

The Digital 1000LW is ideally suited for domestic kitchen applications. It features an integral pullcord and Ferrob's unique electronic continuously-calibrated humidity sensor which ensures that the sensor will always give an accurate reading of the surrounding humidity.

The units are controlled using micro-processor technology and also has the Night-time Set-back feature to eliminate unnecessary running at night and have a manually-operated integral pullswitch.

The fans have a digital display on the front panel which continuously informs the resident of what the fan is doing.

	Power consumption of 11watts max
	Extract rate 235mł/hr, 64 litres per second
	Fans can be wall, ceiling or window mounted
	British made
	Electronic continuouslycalibrated humidity sensor
	Designed to exceed the 2006 Building Regulations on Ventilation (F1)
	Tested to comply with HD280/BS3456 Part 102:342 1988
	2 year no quibble guarantee

Technical Data

Low Wattage 12v DC models

Catalogue No. Type

D 1000 LW Humidity control - The fan will run when humidity rises over the pre-set level of 65% RH. Complete with integral pullcord switch and the unique electronic continuouslycalibrated humidity sensor.

Construction
These fans are moulded in impact resistant high gloss recycled ABS thermoplastics for strength, durability, finish and sustainability.

Electrical

220-230V ~ A.C. 50Hz Single phase consuming 11 watts. These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted. The fan should be mounted a minimum of 1.75 meters from the floor and less than 400mm from the ceiling.

Do not install the fan above a heat source. e.g. radiator

Motor
Single phase dc motor with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal fuse.

Guarantee
Two year no quibble guarantee.

Installation

The fans are designed to be wall, window or ceiling mounted. Kits available on request.

Wall kits comprise a wall sleeve (275mm long) and a gravity grille (white, terracotta, stone, grey or brown).

Window kits comprise an external white gravity grille and internal fixing plate.

Ceiling kits comprise 3m of 150mm flexible ducting and an external fixed grille (colours to suit).

When installing through a wall a 162mm hole is required, 182mm through a window.

Performance
D 1000 LW - extract rate of 235mł/hr, 64 litres per second

Additional Data

Maximum pressure: 50 p.a.

Fan speed: 2400 r.p.m.

Sound volume: 40.0 dB (A).

Maximum operating temperature 40şC.

Protection Rating: IPx4.

Power Consumption: 11W

Sensortronic Digital 1000LW

Unit Dimensions & Cut-outs

A 206mm

B 206mm

C 150mm

D 42mm

E 54mm

Hole sizes:

Wall /Ceiling 162mm

Window 182mm

SPECIFICATION

Extract rate at full speed Supply voltage Max wattage Noise level Warranty Fan Speed Colour Electronic recalibrating sensor Max pressure Digital display Speed options Download
facility

235m³ /h
64ltrs/sec 220/230 11 40db at full speed 2 year RTB 2400 at full speed White Yes 50 p.a. Yes No No

NOTES:
* Specification dependent on model

Back to the top

< < Previous page

Download & print PDF page

print this HTML page

Ferrob Ltd.
Regency House, Kingsclere Park, Kingsclere, Newbury, Berks. RG20 4SW
Tel: 01635 299266 Fax: 01635 299277
Email: sales@ferrob.co.uk

Click here to go to our accreditations page, where you can download backup documentation
Click here to go to our accreditations page, where you can download backup documentation
Powered by Multiplex Internet Services Last updated 19 October 2007 S

Catalogue No.	Type
D 1000 LW	Humidity control - The fan will run when humidity rises over the pre-set level of 65% RH. Complete with integral pullcord switch and the unique electronic continuouslycalibrated humidity sensor.

Extract rate at full speed	Supply voltage	Max wattage	Noise level	Warranty	Fan Speed	Colour	Electronic recalibrating sensor	Max pressure	Digital display	Speed options	Download facility
235m³ /h 64ltrs/sec	220/230	11	40db at full speed	2 year RTB	2400 at full speed	White	Yes	50 p.a.	Yes	No	No