Max Extract (m³/h) | Max Extract (l/s) | Supply Voltage (V) | Max Wattage (W) | Noise Levels dB(A) | Warranty (Years) | Fan Speed (RPM) | Colour | Max Pressure (PA) | Max Operating Temp (ºC) | IP Rating |
---|---|---|---|---|---|---|---|---|---|---|
235 | 64 or 65 |
230 |
20 | 40 | 2 | 2400 | White | 50 | 40 | X4 |
Unit Dimensions | |
---|---|
F | 206mm |
G | 206mm |
H | 150mm |
J | 42mm |
K | 42mm |
Wall Hole | 175mm |
Ceiling Hole | 175mm |
Window Hole | 126mm |
Electrical |
These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted and mounted a minimum of 1.75 metres from the floor and less than 400mm from the ceiling. Do not install the fan above a heat source. e.g. radiator |
Motor |
Single phase induction motor with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal fuse. |
Installation |
230V (A.C. 50Hz Single phase consuming 20 watts) models are designed to be wall, window or ceiling mounted. Kits available on request. Wall kits comprise a wall sleeve (275mm long) and a gravity grille (white, terracotta, stone, grey or brown). Window kits comprise an external white gravity grille and internal fixing plate. Ceiling kits comprise 3m of 150mm flexible ducting and an external fixed grille (colours to suit). When installing through a wall or ceiling a 162mm hole is required, through a window a 175mm hole. NOTE: |