UAX 100mm Axial Fans

For bathroom and toilet application.

Designed for easy installation and attractively styled for discreet integration within the wetroom.    ​ ​​

Suitable for: Bathroom | Toilet

  • Provides effective ventilation
  • Extracts 90m³/hr at 25l/s or 27l/s
  • Can be wall, ceiling or window mounted
  • Manufactured in the UK
  • Low voltage variants available
  • Hour-run meter models will monitor the length of time power is turned on
  • 2 year warranty

Axial Fans:

Incorporate impellers that force air to move parallel to the shaft about which the impellers rotate. Axial fans are suited to short duct runs which connect directly to an external outlet or grille.

​ ​​​​ ​​​ ​

Model Description Certification
UAX100 100mm | Remote switching Product Fiche
UAX100S 100mm | Pull cord
UAX100T 100mm | Timer Product Fiche
UAX100HTS 100mm | Humidity sensor | Timer | Pull cord Product Fiche
UAX100TRS 100mm | Continuous trickle running | Pull cord boost Product Fiche
UAX100PIR 100mm | PIR detector
UAX100TRSH 100mm | Continuous trickle running | Pull cord boost | Hour-run meter monitor
UAX100LV 100mm | Remote switching | Low voltage (SELV - 12V) Product Fiche
UAX100LVS 100mm | Pull cord | Low voltage (SELV - 12V)
UAX100LVT 100mm | Timer | Low voltage (SELV - 12V) Product Fiche
UAX100LVHTS 100mm | Humidity Sensor | Timer | Pull cord | Low voltage (SELV - 12V) Product Fiche
UAX100LVTRS 100mm |Continuous trickle running | Pull cord boost | Low voltage (SELV - 12V) Product Fiche
UAX100LVTRSH 100mm | Continuous trickle running | Pull cord boost | Hour-run meter monitor | Low voltage (SELV- 12V) Product Fiche
Max Extract (m³/h) Max Extract (l/s) Supply Voltage (V) Max Wattage (W) Noise Levels dB/(A) Warranty (Years) Fan Speed (RPM) Colour Max Pressure (PA) Max Operating Temp (ºC) IP Rating
90 25 or 27

230

12 (SELV)

20 40 2 2400 White 50 40 X4

Unit Dimensions
F 166mm
G 166mm
H 100mm
J 42mm
K 42mm
Wall Hole 107mm
Ceiling Hole 107mm
Window Hole 126mm

 

Electrical

220-230V ~ A.C. 50Hz Single phase consuming 20 watts. These fans are double insulated and do not require an earth.

All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted and mounted a minimum of 1.75 metres from the floor and less than 400mm from the ceiling.

Do not install the fan above a heat source. i.e. radiator.

Motor

Single phase induction motor with pre-oiled bearings fitted for a long maintenance-free life and are protected by a thermal fuse.

Installation

Both 230V and 12V ranges are designed to be wall, window or ceiling mounted. Kits available on request.

Wall kits comprise a wall sleeve (275mm long) and a gravity grille (white, terracotta, stone, grey or brown).

Window kits comprise an external white gravity grille and internal fixing plate.

Ceiling kits comprise 3m 100mm flexible ducting and an external fixed grille (colours to suit).

Installation through a wall or ceiling requires a 107mm hole, through a window a 126mm hole.

NOTE:
For standard installation through a wall, we recommend a 107mm dia hole.

For special installations through a wall using an internal cowle system (IC100), we recommend a 117mm dia hole.

For standard installation through a window, we recommend a 125mm dia hole.

Suitable core drills (107mm and 117mm) are available separately.