UAX-ES 100mm Axial Fans

For bathroom and toilet application. Includes electronic shutters operated by thermoactuator.

Designed for easy installation and attractively styled for discreet integration within the wetroom. Features silently operating electronic shutters - controlled by the thermoactuator.

Suitable for: Bathroom | Toilet

  • Provides effective ventilation
  • Extracts 90m³/hr at 25l/s or 27l/s
  • Electronic shutters eliminate back draught
  • Manufactured in the UK
  • Low voltage variants available
  • 2 year warranty

Axial Fans:

Incorporate impellers that force air to move parallel to the shaft about which the impellers rotate. Axial fans are suited to short duct runs which connect directly to an external outlet or grille.

Model Description Certification
UAXES100 100mm | Remote switching Product Fiche
UAXES100S 100mm | Pull cord
UAXES100T 100mm | Timer
UAXES100HTS 100mm | Humidity sensor | Timer | Pull cord Product Fiche
UAXES100LV 100mm | Remote switching | Low voltage (SELV - 12V)
UAXES100LVS 100mm | Pull cord | Low voltage (SELV - 12V)
UAXES100LVT 100mm | Timer | Low voltage (SELV - 12V)
UAXES100LVHTS 100mm | Humidity sensor | Timer | Pull cord | Low voltage (SELV - 12V)
Max Extract (m³/h) Max Extract (l/s) Supply Voltage (V) Max Wattage (W) Noise Levels dB(A)

Warranty (Years)

Fan Speed (RPM)

Colour

Max Pressure (PA)

Max Operating Temp (ºC) IP Rating
90 25 or 27

230

12 (SLEV)

20 34 2 2400 White 35 50 X4

Dimensions

Unit Dimensions
A 166mm
B 166mm
C 150mm
D 30mm
Ø 100mm
Diameter of Hole 125mm
Wall Hole 107mm

Graph for Range

Electrical

These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted and mounted a minimum of 1.75 metres from the floor and less than 400mm from the ceiling.

Do not install the fan above a heat source. e.g. radiator

Motor

Single phase induction motor with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal fuse.

Installation

Both 230V (A.C. 50Hz Single phase consuming 20 watts) and 12V ranges are designed to be wall, window or ceiling mounted. Kits available on request.

Wall kits comprise a wall sleeve (275mm long) and an external fixed grille (white, terracotta, stone, grey or brown).

Window kits comprise an external white fixed grille and internal fixing plate.

Ceiling kits comprise 3m 100mm flexible ducting and an external fixed grille (colours to suit).

Installation through a wall or ceiling requires a 107mm hole, through a window a 107mm hole.