"breathing life into your environment"

Home

News

New Products

Products

Brochure

O & I Instructions

Helpful Notes

Vacancies

About us

Contact Us

Accreditations

Recycling

Open Flue Spillage Prevention Fan WW150AXSG: 230v

Download & print PDF page

The WW150AXSG kitchen fan comprises quiet, efficient, axial flow fans for wall, ceiling or window mounting. Designed for easy installation, attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning and incorporating the latest technology and design. The units have silently operating electric shutters controlled by a well proven thermo-electric activator. These shutters are designed to eliminate back-draught. The WW150AXSG is ideally suited where gas spillage may occur. IMPORTANT When this unit is installed in the same room as an open flued appliance, IT MUST ONLY be set on a maximum extract rate of 20 ltrs/sec

Adjustable extract rate 20- 65 litres per second Fans can be wall or window mounted British made Designed to exceed the 2006 Building Regulations on Ventilation (F1) Tested to comply with HD280/BS3456 Part 102:342 1988 2 year no quibble guarantee

Technical Data

Construction	These fans are moulded in impact resistant high gloss ABS thermoplastics for strength, durability and finish
Electrical	220-230v ~ A.C. 50Hz Single phase consuming 20 watts. These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted. The fan should be mounted a minimum of 1.75 metres from the floor and less than 400mm from the ceiling. Do not install the fan above a heat source. e.g. radiator, cooker.
Motor	Single phase induction motor with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal fuse.
Guarantee	Two year no quibble guarantee.
Installation	Designed to be wall or window mounted. Kits available on request. Wall kits comprise a wall sleeve (275mm long) and a gravity grille (white, terracotta, stone, grey or brown) Window kits comprise an external white gravity grille and internal fixing plate. Installation through a wall requires a 162mm hole, through a window a 185mm hole.
Performance	WW150AXSG - extract rate of 20 – 65 litres per second.
Additional Data	Maximum pressure: 50 p.a. Fan speed: 2400 r.p.m. Sound volume: 38.0 dB(A) Maximum operating temperature 40ºC. Protection Rating: - IPx4

Mains Voltage models Sound volume: 38.0 dB(A) Voltage: 230v AC Frequency: 50 Hz Wattage: 20W Max. Temp: 40ºC Weight: 1.11kg Max Pressure: 50pa Diameter of hole: Window 185 mm Wall 162 mm Glass thickness : Up to 30mm

A 220 B 205 C 155 D 50 E 48

IMPORTANT When this unit is installed in the same room as an open flued appliance, IT MUST ONLY be set on a maximum extract rate of 20 ltrs/sec

Back to the top

< < Previous page

Download & print PDF page

print this HTML page

	Ferrob Ltd. Regency House, Kingsclere Park, Kingsclere, Newbury, Berks. RG20 4SW Tel: 01635 299266 Fax: 01635 299277 Email: sales@ferrob.co.uk
Click here to go to our accreditations page, where you can download backup documentation Powered by Multiplex Internet Services Last updated 19 October 2007 S