"breathing life into your environment"

Home

News

New Products

Products

Brochure

O & I Instructions

Helpful Notes

Vacancies

About us

Contact Us

Accreditations

Recycling

UAX-ES100 Range: 230v and 12v

Download & print PDF page

The UAX-ES100 range of 100mm (4") bathroom and toilet fans comprises quiet, efficient, axial flow fans for wall, ceiling or window mounting. Designed for easy installation, attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning and incorporating the latest technology and design. The units have silently operating electric shutters controlled by a well proven thermo-electric activator. These shutters are designed to eliminate back-draught. The UAX-ES100 series is ideally suited for domestic applications including bathrooms, toilets and shower areas. The range also includes 12v Low Voltage models for use when required.

Extract rate 90m³/hr, 27 litres per second Fans can be wall, ceiling or window mounted British made Designed to exceed the 2006 Building Regulations on Ventilation (F1) Tested to comply with HD280/BS3456 Part 102:342 1988 2 year no quibble guarantee

Technical Data

230v models	Low Voltage 12v models
Catalogue No.	Catalogue No.	Type
UAX-ES100	UAX-ES100LV	Standard model - for remote switching.
UAX-ES100S	UAX-ES100LVS	As above supplied with pull switch switch.
UAX-ES100T	UAX-ES100LVT	Timer model - with integral over-run timer (15 mins).
UAX-ES100HTS	UAX-ES100LVHTS	Humidity control - The fan will run will run when humidity rises over the pre-set level of 65% RH. Complete with integral timer (15 mins) and pull switch switch.

Construction	These fans are moulded in impact resistant high gloss ABS thermoplastics for strength, durability and finish.
Electrical	· 220-230v ~ A.C. 50Hz Single phase consuming 20 watts. These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted and mounted a minimum of 1.75 metres from the floor and less than 400mm from the ceiling. Do not install the fan above a heat source. e.g. radiator
Motor	Single phase induction motor with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal fuse.
Guarantee	Two year no quibble guarantee.
Installation	Both 230v and 12v ranges are designed to be wall, window or ceiling mounted. Kits available on request. Wall kits comprise a wall sleeve (275mm long) and an external fixed grille (white, terracotta, stone, grey or brown) Window kits comprise an external white fixed grille and internal fixing plate. Ceiling kits comprise 3m 100mm flexible ducting and an external fixed grille (colours to suit) Installation through a wall or ceiling requires a 107mm hole, through a window a 107mm hole.
Performance	UAX-ES100 / UA-ES100LV - extract rate of 90³/hr, 27 litres per second.
Additional Data	Maximum pressure: 35 p.a. Fan speed: 2300 r.p.m. Sound volume: 34.0 dB(A) Maximum operating temperature 50ºC. Protection Rating – IPx4

Mains voltage models
Extract volume	90m³/h
Sound volume	34.0dB (A)@3m
Voltage	220 - 230v AC~
Frequency	50 Hz
Wattage	20W
Max Temp	50°C
Weight	0.61kg
Max Pressure	35pa
Window Fitting
Diameter of hole:	125 mm
Wall Hole	107 mm

Unit Dimensions & Cut-outs
A	166 mm
B	166 mm
C	150 mm
D	30 mm
Ø	100 mm

Back to the top

< < Previous page

Download & print PDF page

print this HTML page

	Ferrob Ltd. Regency House, Kingsclere Park, Kingsclere, Newbury, Berks. RG20 4SW Tel: 01635 299266 Fax: 01635 299277 Email: sales@ferrob.co.uk
Click here to go to our accreditations page, where you can download backup documentation Powered by Multiplex Internet Services Last updated 19 October 2007 S