Sensortronic Digital 1000: Low Wattage

Download & print PDF page

Sensortronic Digital 1000 (D 1000) : Low Wattage Using the latest technology DC motors and consuming only 8watts (max), the Sensortronic Digital 1000 Low Wattage 150mm (6") kitchen fan comprises a quiet, efficient, axial flow fan for wall, ceiling or window mounting.

Designed for easy installation, attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning and incorporating the latest technology and design.

The Digital 1000LW is ideally suited for domestic kitchen applications. It features an integral pullcord and Ferrob's unique electronic continuously-calibrated humidity sensor which ensures that the sensor will always give an accurate reading of the surrounding humidity.

The units are controlled using micro-processor technology and also has the Night-time Set-back feature to eliminate unnecessary running at night and have a manually-operated integral pullswitch.

The fans have a digital display on the front panel which continuously informs the resident of what the fan is doing.

	Power consumption of 8 watts max
	Extract rate 235mł/hr, 64 litres per second
	Fans can be wall, ceiling or window mounted
	Integral speed switch
	British made
	Electronic continuously calibrated humidity sensor
	Designed to exceed the 2006 Building Regulations on Ventilation (F1)
	Tested to comply with HD280/BS3456 Part 102:342 1988
	2 year no quibble guarantee

Technical Data

230v models

Catalogue No. Type

D 1000 LW Humidity control - The fan will run when humidity rises over the pre-set level of 65% RH. Complete with integral pullcord switch and the unique electronic continuously calibrated humidity sensor.

Construction
These fans are moulded in impact resistant high gloss recycled ABS thermoplastics for strength, durability, finish and sustainability.

Electrical

220-230V ~ A.C. 50Hz Single phase consuming 8 watts. These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted. The fan should be mounted a minimum of 1.75 meters from the floor and less than 400mm from the ceiling.

Do not install the fan above a heat source. e.g. radiator

Motor
Single phase dc motor with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal fuse.

Guarantee
Two year no quibble guarantee.

Installation

The fans are designed to be wall, window or ceiling mounted. Kits available on request.

Wall kits comprise a wall sleeve (275mm long) and a gravity grille (white, terracotta, stone, grey or brown).

Window kits comprise an external white gravity grille and internal fixing plate.

Ceiling kits comprise 3m 150mm flexible ducting and an external fixed grille (colours to suit).

Performance
D 1000LW - extract rate of 235mł/hr, 64 litres per second.

Additional Data

Maximum pressure: 50 p.a.

Fan speed: 2 400 r.p.m.

Sound volume: 40.0 dB(A) Maximum operating temperature 40şC.

Maximum operating temperature 40şC.

Protection Rating – IPx4

Power Consumption: 8W max

Unit Dimensions & Cut-outs

A 206mm

B 206mm

C 150mm

D 42mm

E 54mm

Hole sizes:

wall/ceiling 162mm

window 175-182mm

SPECIFICATION

Extract rate
at full speed Supply voltage Max wattage Noise level Warranty Fan Speed Colour Self-cleaning sensor Max pressure Digital display Speed options Download facility

235mł/h
64ltrs/sec 220/230 8 40db at full speed 2 year RTB 2 400 at full speed White Yes 50 p.a. Yes Yes No

NOTES:

* Specification dependent on model

Graph for Digital 1000 Range

Back to the top
< < Previous page Download & print PDF page print this HTML page

Ferrob Ltd.
Regency House, Kingsclere Park, Kingsclere, Newbury, Berks. RG20 4SW
Tel: 01635 299266 Fax: 01635 299277
Email: sales@ferrob.co.uk

Click here to go to our accreditations page, where you can download backup documentation
Click here to go to our accreditations page, where you can download backup documentation
Powered by Multiplex Internet Services Last updated 24 August 2010 S

Catalogue No.	Type
D 1000 LW	Humidity control - The fan will run when humidity rises over the pre-set level of 65% RH. Complete with integral pullcord switch and the unique electronic continuously calibrated humidity sensor.

Unit Dimensions & Cut-outs
A	206mm
B	206mm
C	150mm
D	42mm
E	54mm
Hole sizes:
wall/ceiling	162mm
window	175-182mm

Extract rate at full speed	Supply voltage	Max wattage	Noise level	Warranty	Fan Speed	Colour	Self-cleaning sensor	Max pressure	Digital display	Speed options	Download facility
235mł/h 64ltrs/sec	220/230	8	40db at full speed	2 year RTB	2 400 at full speed	White	Yes	50 p.a.	Yes	Yes	No