Centrifugal 200 Range for kitchens: 230v

Download & print PDF page

Centrifugal 200 Range for kitchens: 230v The CF200 range of 100mm (4") kitchen fans comprises efficient, centrifugal flow fans for wall or ceiling mounting. Designed for easy installation, attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning and incorporating the latest technology and design.

The CF200 series is ideally suited for domestic applications where higher back pressures are present. These are normally associated where flat ducting or long lengths of circular ducting are used.

	Extract rate 260mł/hr, 73 litres per second
	Fans can be wall or ceiling mounted
	British made
	Designed to exceed the 2006 Building Regulations on Ventilation (F1)
	Tested to comply with HD280/BS3456 Part 102:342 1988
	2 year no quibble guarantee

Technical Data

230v models

Catalogue No. Type

CF200 Standard model - for remote switching.

CF200S As above supplied with integral pull switch.

CF200T Timer model - with integral over-run timer (15 mins).

CF200HTS Humidity control - The fan will run when humidity rises over the pre-set level of 65% RH. Complete with integral timer (15 mins) and pull switch.

CF200TRS Continuously running trickle speed with pull switch Boost.

Construction
These fans are moulded in impact resistant high gloss ABS thermoplastics for strength, durability and finish.

Electrical

220-230V ~ A.C. 50Hz Single phase consuming 88 watts. These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted and mounted a minimum of 1.75 metres from the floor and less than 400mm from the ceiling.

Do not install the fan above a heat source. e.g. radiator

Motor
Single phase induction motor with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal fuse.

Guarantee
Two year no quibble guarantee.

Installation

The range is designed to be wall or ceiling mounted. Kits available on request.

Wall kits comprise a wall sleeve (275mm long) and a gravity grille (white, terracotta, stone, grey or brown).

Ceiling kits comprise 3m 100mm flexible ducting and an external fixed grille (colours to suit).

A full range of flat/round duct accessories are available - contact sales@ferrob.co.uk for information.

Performance

CF200 - extract rate of 260ł/hr, 73 litres per second (through wall measurement).

Additional Data

Maximum pressure: 363 pa see graph below. Fan speed: 2400 r.p.m.

Sound volume: 40.0 dB(A) Maximum operating temperature 40şC.

Protection Rating – IPx4

Unit Dimensions & Cut-outs

A 265mm

B 20mm

C 115mm

Ř 97mm

Wall Hole 107mm

Ceiling Hole 107mm

Back to the top
< < Previous page Download & print PDF page print this HTML page

Ferrob Ltd.
Regency House, Kingsclere Park, Kingsclere, Newbury, Berks. RG20 4SW
Tel: 01635 299266 Fax: 01635 299277
Email: sales@ferrob.co.uk

Click here to go to our accreditations page, where you can download backup documentation
Click here to go to our accreditations page, where you can download backup documentation
Powered by Multiplex Internet Services Last updated 19 October 2007 S

Catalogue No.	Type
CF200	Standard model - for remote switching.
CF200S	As above supplied with integral pull switch.
CF200T	Timer model - with integral over-run timer (15 mins).
CF200HTS	Humidity control - The fan will run when humidity rises over the pre-set level of 65% RH. Complete with integral timer (15 mins) and pull switch.
CF200TRS	Continuously running trickle speed with pull switch Boost.