"breathing life into your environment"

Home

News

New Products

Products

Services

Brochure

O & I Instructions

Helpful Notes

Vacancies

About us

Contact Us

Accreditations

Recycling

Centrifugal 100 Range for bathrooms and toilets: 230v and 12v		Download & print PDF page
The CF100 range of 100mm (4") bathroom and toilet fans comprises efficient, centrifugal flow fans for wall or ceiling mounting. Designed for easy installation, attractively styled in high gloss ABS thermoplastics for modern appearance and ease of cleaning and incorporating the latest technology and design. The CF100 series is ideally suited for domestic applications where higher back pressures are present. These are normally associated where flat ducting or long lengths of circular ducting are used. The range also includes 12v Low Voltage models for use when required.	Extract rate 90m³/hr, 27 litres per second Fans can be wall or ceiling mounted British made Designed to exceed the 2006 Building Regulations on Ventilation (F1) Tested to comply with HD280/BS3456 Part 102:342 1988 2 year no quibble guarantee

Technical Data

230v models

Catalogue No.	Type
CF100	Standard model - for remote switching.
CF100S	As above supplied with integral pull switch.
CF100T	Timer model - with integral over-run timer (15 mins).
CF100HTS	Humidity control - The fan will run when humidity rises over the pre-set level of 65% RH. Complete with integral timer (15 mins) and pull switch.
CF100TRS	Continuously running trickle speed with pull switch Boost.
CF100TRST	Continuously running trickle speed with remote boost.

Low Voltage 12v models

Catalogue No.	Type
CF100LVS	with pull switch.
CF100LVT	Timer model incorporating integral over-run timer (15 mins).
CF100LVTRS	Continuously running trickle speed with pull switch Boost.
CF100LVHTS	Humidity control - The fan will run when humidity rises over the pre-set level of 65% RH. Complete with integral timer (15 mins) and pull switch.

Construction	These fans are moulded in impact resistant high gloss ABS thermoplastics for strength, durability and finish.
Electrical	220-230v ~ A.C. 50Hz Single phase consuming 38 watts. These fans are double insulated and do not require an earth. All wiring must comply with current IEE regulations. A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted. The fan should not be accessible to a person using either the shower or the bath and mounted a minimum of 1.75 metres from the floor and less than 400mm from the ceiling. Do not install the fan above a heat source. e.g. radiator
Motor	Single phase induction motor with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal fuse.
Guarantee	Two year no quibble guarantee.
Performance	CF100/CF100LV 90m³/hr, 27 litres/sec
Installation	Both 230v and 12v ranges are designed to be wall or ceiling mounted. Kits available on request. Wall kits comprise a wall sleeve (275mm long) and a gravity grille (white, terracotta, stone, grey or brown). Ceiling kits comprise 3m 100mm flexible ducting and an external fixed grille (colours to suit). A full range of flat/round -duct accessories are available - contact sales@ferrob.co.uk for information. Installation through a wall or ceiling requires a 107mm hole.
Additional Data	Maximum pressure: 108 p.a. see graph below. Fan speed: 2400 r.p.m. Sound volume: 38.0 dB(A) Maximum operating temperature 50ºC. Protection Rating – IPx4

Unit Dimensions & Cut-outs A 230mm B 20mm C 105mm Ø 97mm Wall Hole 107mm Ceiling Hole 107mm

Back to the top

< < Previous page

Download & print PDF page

print this HTML page

	Ferrob Ltd. Regency House, Kingsclere Park, Kingsclere, Newbury, Berks. RG20 4SW Tel: 01635 299266 Fax: 01635 299277 Email: sales@ferrob.co.uk
Click here to go to our accreditations page, where you can download backup documentation Powered by Multiplex Internet Services Last updated 24 August 2010 S